WeldBond Universal Adhesive
We have been using this glue for over 16 years in our shop on all our projects
and we love it. We have told countless people over the years about it and
where to buy it (Home Depot), now they also love it. Well, Home Depot stopped
selling it, for some strange reason. Everyone started calling us asking where
they can buy it now. So we decided now was the time for us to start selling this
great glue.
WeldBond is a power-packed adhesive that bonds most anything. WeldBond is universal, that means it works fast to permanently join many products to themselves as well as to each other. Take a look at what WeldBond can virtually weld together: cardboard, china, cork, fabrics, foam plastic, furniture, leather, marble, paper, plastic laminates, plywood, rope, slate, stone, veneers, cement, concrete, bricks, plaster, metal, glass, wood, tiles, building panels, and much much more. We also use it to bond our acrylic sheets to wood with great results.
With WeldBond, the joint is stronger than the wood !!! WeldBond contains no fillers and is up to 3 to 4 times thicker than other wood glues. Tack is developed very rapidly, yet it's still possible to adjust the assembly into final position without difficulty. No heavy clamping is involved. In most cases, hand pressure is enough to give a flexible bond of enormous strength. All glue lines & drips can be removed up to 20 minutes after gluing, by washing thoroughly with warm water. Let dry, then stain or clear coat for a uniform finish. Unlike most yellow wood glues that may leave a stain where it runs or drips. It is non-flammable, non-toxic and dries crystal clear. It's flexible and completely weatherproof, too. Highly water-resistant, It's non-staining and will not become brittle with age. Water clean-up.
Must Be Protected From Freezing
We Stock WeldBond in Three Sizes - 4, 8, & 21 ounce Bottles
| Stock # | Description | Price |
| #WB-4 | 4 ounce Bottle | $4.50 |
| #WB-8 Out Of Stock | 8 ounce Bottle | $5.95 |
| WB-21 | 21 ounce Bottle | $10.95 |
Give Weldbond A Try - We Think You Will Really Like It !!!
Best Seller !!! Works Great !!!
Removable Adhesive Paper
Do you love to scroll but hate scraping off the pattern?
Then you need to try our Removable Adhesive Paper !!
Make a copy of your pattern on Our Removable Adhesive Paper, Peel off the paper backing, Place it on your wood or other scrolling material, Cut out the pattern, Then Simply Peel the paper off. No spray glues, No scraping, no paint thinner, no mess, no problems. It works great in all copiers, laser & inkjet printers. (like all other adhesives it does gain strength with age, depending on the material your scrolling it could be a little more difficult to remove after sitting for several days)
Each sheet measures 8½" x 11"
Because You Requested Larger Packs - We Now Stock 250 Sheets Packs - Saves You More $$$
| Stock # | Description | Cost |
| # AP10 | 10 Sheets Removable Adhesive Paper | $3.95 |
| # AP25 | 25 Sheets Removable Adhesive Paper | $9.50 |
| # AP100 | 100 Sheets Removable Adhesive Paper | $30.00 |
| # AP250 | 250 Sheets Removable Adhesive Paper | $65.00 |
Stretch Wrap
This is the same wrap we wrap all your orders with. It forms to any shape and only sticks to itself. This wrap works great for clamping when your gluing irregular shapes. You can put a little tension or a lot of tension when wrapping something, just stretch it tighter. You can keep your wood wrapped together at all times to help stop it from warping. It has many uses around the house or shop. Works great when your moving, wrap the drawers shut and they don't slide out while your moving them. We have found hundreds of uses for it. The wrap is a heavy duty 120 gauge and the rolls are 3 inches wide & 700 foot long.
Handles are now back in stock !!! They make it much easier to use and to wrap your items.
Single Roll - Stock # WRAP - $ 6.95 per roll
Handle not included !!!
Need a handle for the single rolls of wrap? We now have them in stock !!!
Handle - Stock # WRAP-H - $3.95 each
On
- Off Foot Switch
Have you ever had your scroll work to break - while reaching under your table to find the off switch? Keep both hands holding you work down using our foot switch. Just step on it and your saw turns on - - lift your foot and your saw turns off !!! No more blindly reaching under you scroll saw table to find your on-off switch. Saves lots of time and heartache.
This momentary Foot Switch is for use with all scroll saws, drill presses or other stationary power tools that the user wants to turn on and off without using the manual switch. An 18" cord for attaching to power tool and a 6 foot cord with 3-prong grounded plug for attaching to wall outlet. Rated 110/130V, 1/4 HP, 10amp max.
Stock # - SWITCH - $39.95 each
12" Fret Saw Frame
This 12" deep - Solid Steel - Flat Wire Frame works excellent for detailed scroll work & marquetry. It is well balanced and the rigid wire frame keeps the blade taut for pull or down stroke sawing. The handle can be folded between frame ends for storage. It will accept all 5 inch pin-less blades.
Stock # FSF-1 - $19.95
Small Brass Plated Screws
Below is a chart showing the sizes and types of screws we stock. All are sold in packs of 100
| Stock # | Description | Type | Cost per pack of 100 |
| # F1101 | # 2 x 1/8" Round Head | Brass Plated | $2.95 |
| # F1102 | # 2 x 1/4" Round Head | Brass Plated | $2.95 |
| # F1105 | # 2 x 1/2" Round Head | Brass Plated | $2.95 |
| # F1108 | # 3 x 1/4" Round Head | Brass Plated | $2.95 |
| # F1200 | # 2 x 3/8" Pan Head | Brass Plated | $2.95 |
| # F1203 | # 4 x 3/8" Pan Head | Brass Plated | $2.95 |
| # F1206 | # 4 x 1/2" Pan Head | Brass Plated | $2.95 |
| # F1400 | # 2 x 3/8" Flat Head | Brass Plated | $2.95 |
| # F1401 | # 2 x 1/2" Flat Head | Brass Plated | $2.95 |
| # F1402 | # 3 x 1/4" Flat Head | Brass Plated | $2.95 |
| # F1405 | # 3 x 3/8" Flat Head | Brass Plated | $2.95 |
Wire Nails - #18 Wire Gauge
We stock these wire nails in four lengths they are all #18 wire gauge. They are sold in a three ounce pack or one pound box.
These are Nails not Brads they have flat heads on them
| Stock # | Description | Cost |
| # N38 | 3 ounces - 3/8" Wire Nails | $1.45 |
| # N38-LB | 1 pound - 3/8" Wire Nails | $5.95 |
| # N34 | 3 ounces - 3/4" Wire Nails | $1.45 |
Picture Hangers & Turn Buttons
| Stock # | Description | 10 pack | 100 pack | |
 |
H-104 | Triangle Hanger mounting screws are not included | 95¢ | $8.95 |
 |
H-107 | Zinc Plated Ring Hanger 1/2"x1" mounting screws are not included | 75¢ | $5.95 |
 |
H-105 | No-Nail Saw Tooth Hanger 5/16"x15/16" | 95¢ | $8.95 |
 |
H-102
|
Small Saw Tooth Hanger Zinc Plated 5/16"x1 7/8" - 3/8" nails are included | 79¢ | $4.95 |
 |
H-106
|
Large Saw Tooth Hanger Zinc Plated 1/4"x3" - 1/2" nails are included | 95¢ | $5.95 |
 |
TB-2 Large
TB-5 Small |
Large Brass Plated Turn
Button 1" long with #3x3/8" brass plated screw
Small Brass Plated Turn Button 5/8" long with #2x1/4" brass plated screw |
95¢
95¢ |
$8.50
$8.50 |
Denim Shop Apron
Our shop apron is long lasting and is made of first quality 12 oz dark blue denim.
It features breast and waist pockets One size fits all with this 28"x36" apron.
Keeps the stain, paint, & glue off your clothes. My wife loves my apron !!
Stock # - APRON
Machine Squares
Our 2" Square is just the right size to fit under the top arm of your scroll saw.
Keeps your blades square with your table.
A must when stack cutting !!!
Stock # - SQ2 - $4.95 each
Our 6" Square is great for table saws, band saws, etc...
Stock # - SQ6 - $6.95 each
New
Item !!! 
4-pc Machinist's Square Set
A handy set to have around your shop. Each square is finely ground stainless steel. They are highly accurate for machine set-up and layout work. All have common beam and blade widths and thicknesses which will allow them to be used in combination.
This set includes one each of the following sizes - 2", 3", 4" & 6" Squares
Stock # - D4089 - $32.95 per set
Rubber Shop Pads
These premium quality neoprene rubber work pads are indispensable for routing, sanding, protecting tools, lining drawers, dampening vibration, and more. These pads last 10 times as long as the cheap woven pads, and they work 10 times better as well.
All pads are 24" wide 36" long and 1/8" thick and are available in three colors: tan, gray and black
| Stock # | Description | Cost Each | |
 |
W1320 | Router Pad - Tan | $11.95 |
 |
W1321 | Sanding Pad - Gray | $11.95 |
 |
W1322 | Anti-Vibration Pad - Black | $11.95 |
Small Shop Tools
| Stock # | Description | Cost Each | |
|
#D3589 |
Mini Grinder Set in Aluminum Case
Includes all the accessories & tough aluminum case for any mini grinding need. The set includes: 12 volt DC Mini Grinder & DC Transformer - 10pc grinding stone set - 8pc sanding drum set - 3pc brush set - 5pc cutting wheel set - 2pc polishing wheel set - 1pc engraving bit - 4pc mini drill bit set - 2pc mandrel set - 1pc whetstone - 20pc diamond polisher set. No load grinder speed is 12,000 RPM. Comes with 3/64", 3/32", 7/64" & 1/8" collets |
$23.95 |
|
#D3737 |
3-in-1 Stapler Kit
This 3-in-1 stapler shoots 3/8" standard crown staples, 1/4" U-shaped crown staples and T-brads. It has an adjustable driving force and it is very easy to reload. Accepts 3/16 to 9/16" long 3/8" crown staples. Accepts 3/8" to 1/2" long 1/4" U-shaped staples. Accepts 3/8" to 9/16" long T-brads. Includes 500 Each - - 3/8" T-Brads, 1/2" long U-Shaped Staples & 5/16"long 3/8" Crown Staples. Also includes a plastic storage case. |
$19.95 |
|
#D3738 |
3/8" Standard Crown Staples
Box of 1000 Staples 3/8" Crown - 5/16 long Fits D3737 Stapler |
$4.95 |
|
#D3739 |
1/4" U-Shape Staples
Box of 1000 Staples 1/4" Crown - 1/2" Long Fits D3737 Stapler |
$4.95 |
|
#D3740 |
3/8" T-Brads
Box of 1000 T-Brads Fits D3737 Stapler |
$4.95 |
|
#W1306
#W1307 |
Pro-Stik
Dramatically increase the life of your sanding belts & discs with our High Quality Pro-Stik Abrasive Belt Cleaner. Simply press the cleaner lightly against moving sanding belts & discs to remove clogged-up pitch and sawdust. The Pro-Stik will pay for itself over and over again with the money you save not having to buy new sanding belts and discs all the time. #W1306 - Measures - 1½"x1½"x 8½" #W1307 - Measures - 2"x 2"x 12"
|
#W1306
- $ 8.95
#W1307 - $ 14.95 |
 |
#D3282 |
Heavy Duty Blow Gun with a 12" Nozzle
This Heavy-Duty Blow Gun features solid die-cast construction and is rated at 180 max PSI. 1/4" NPT. It has a 12" long nozzle that will easily reach into small areas. I use one all the time when blowing sawdust from inside all our saws and sanders. |
$7.95 |
 |
#D3290 |
Band Clamp
This 15' Band Clamp applies even clamping pressure all the way around difficult to clamp items. One inch wide nylon webbing & ratchet mechanism apply plenty of clamping pressure. Great for picture frames !!! |
$9.95 |
 |
#D3234 |
Magnifying Tweezers Three X Magnifying glass and needle tipped tweezers combine to make this one of the handiest items in the tool box or first aid kit. |
$4.95 |
 |
#D3251 |
Desk Magnifier
This 3", 3 power Desk Magnifier eliminates eye strain when viewing fine detail and small print. Clear base allows plenty of ambient light to enter viewing. Base measures 4 ¼" |
$7.95 |
 |
#OILER |
Pocket Oiler Just squeeze & you'll get the right amount of lightweight oil with rust inhibitors. Will dispense one drop at a time. Great for all bearings on router bits, scroll saws, etc... |
$3.95 |
 |
#D2670 |
4-oz Cross Peen Hammer This well balanced 4oz cross peen hammer has a hickory handle and is perfect for driving small nails, brads, & tacks. Narrow cross peen face allows starting brads, etc.. while holding between thumb and forefinger. The opposite round face drives it home. |
$8.49 |
 |
#D3628 |
16 piece Mini Clamp Set
with Storage Case Ideal for small clamping & hobby needs, this 16pc Mini Clamp Set includes eight 1" spring clamps, two 1 1/2" spring clamps, two 4" quick release bar clamps, one 1 5/8" C-clamp, one 1 1/8" C-clamp, one 3/4" C-clamp & one C-clamp magnetic base. Each clamp is organized in a fitted plastic storage case. |
$22.95 |
 |
# D3096 |
Feather Board Reduces the risk of kick-back & achieve consistent results. Designed to lock into standard 3/8"x3/4" miter gauge slots. Adjustable for various stock widths & miter slot locations |
$14.95 |
 |
# D3114 |
100-pc Sanding, Grinding, Polishing, Buffing Kit All have 1/8" shanks that will fit dremel tools. Includes various shaped burrs, grinding stones, brushes, cutting discs, sanding drums etc... All in a wooden box. |
$24.95 |
 |
#D3291 |
150-pc Rotary Tool Kit
Anyone that owns a rotary tool will appreciate this huge selection of cutting, grinding, sanding, & polishing accessories. Includes plenty of mini burrs, cutting discs, buffing pads, wire brushes & grinding stones as well as arbors, collets, drill bits, & mini drum sanders. Each item is neatly organized in a tilt-out carrying case |
$39.95 |
 |
# HDMAG |
Double Lens Head Magnifier
Lightweight, plastic lens, Velcro closure of headband, Works with all glasses, up to 4.8x power, an inexpensive alternative to the more costly type |
$9.95 |
 |
# D2473 |
Diamond Pocket File - 400 grit It's the perfect sharpening tool for radius carbide tipped router bits, shaper cutters and steel carving gouges. Also works great on fishing hooks with it's special fish hook groove. Includes vinyl storage pouch. |
$8.95
|
 |
# D1123 |
Knife Sharpener Sharpen planer and joiner knives without removing them from the cutterheads. Features two 400 grit stones, a flat for bevels, and a diagonal for flat edges. Each stone has four surfaces, which can be adjusted to provide a fresh sharpening surface |
$9.95 |
 |
# D2489
|
5-piece Carving Chisel Set These Carving Chisels are designed to be used by hand pressure alone. Ergonomic handles have no-slip thumb and forefinger grips Set includes 1/4" straight, 1/4" skew, 1/8" vee, 1/8" gouge & 1/4" gouge. 5 3/4" long |
$9.95 |
Push Blocks
Our push blocks are constructed of high-impact molded plastic with natural
rubber friction pads that grip the work piece firmly.
Bright safety-orange color makes easy to find and reminds woodworkers that safety comes first !!!
Small Push Block - Stock # - W1400 - $4.95 each
Large Push Block - Stock # - W1401 - $9.95 each
Push Stick
This essential safety item keeps hands a safe distance from blades and cutters while still maintaining control of the workpiece against machine faces. A true necessity when running narrow stock. Durable handle is designed for maximum control. Measures 13 ½" overall. Super Ergonomic Design !!!
Stock # - D3122 - $9.95 each
New Item !!! Shop Fox 5-pc
Safety Kit
This safety kit has five essential jigs for increased safe table saw operation. It includes two push blocks, a push stick, a featherboard and a combination saw and router gauge to set the height of table saw blades and the depth of cuts on router bits. The adjustable featherboard fits standard 3/8"x3/4" miter slots. All pieces except the gauge are Made of High Visibility Yellow Plastic.
Stock # - D4061 - $24.95